Tema: Re: Asus wl500gpv2/mezonas nu niekaip neveikia
Autorius: karolisp aka lom
Data: 2010-01-08 18:48:22
kurioj vietoj pvz tu matai 192.168.0.1 kaip DNS?
gal man jau reikia akinių?
"Tomas J." <tomas@novena.lt> wrote in message
news:hi6ol0$oj0$1@trimpas.omnitel.net...
> Nezinau, visi kompai veikia per DHCP is routerio su mezon modemu, DNS'as
> routerio kaip pvz 192.168.0.1
>
> "karolisp aka lom" <lomzig@delgmail.com> wrote in message
> news:hi5ksc$1mq$1@trimpas.omnitel.net...
>> mmm dar įdomu būtų sužinot ar pasileidus mezoną viskas tvarkoje su DNS
>> serveriu, nes pas mane tokia problema atsirado kad neviekia DNS requestų
>> forwardinimas, ir reikia dėti dhcp confige erdvių DNS'ą, į kurį tada
>> tiesiai kompai kreipiasi, t.y. primary DNS yra ne routeris, o išorinis
>> servas.
>>
>> taip pat įdomus pastebėjimas kad ilgiau nerebootinus viso aparato,
>> /etc/resolv.conf prisirašo dafiga dublikatų DNS servų kuriuos modemas
>> gauna iš mezono... čia spėju susiję su "švelniu" atjungimu kuris kažkodėl
>> netrigerina ifdown, bet prisijungus išmeta ifup eventus...
>> jei kas turėtų minčių kaip pataisyt šiuos gliukus - welcome.
>> aparac wl500gx
>>
>> "Tomas J." <tomas@novena.lt> wrote in message
>> news:hhvsqd$7d7$1@trimpas.omnitel.net...
>>> Neturiu as to routerio, cia bendrabarbiams as juos flesinau,viena ant
>>> mezono kita ant 3g pakolkas ena be luzimu. Pagal tavo loga tai manau kad
>>> tikrai tave firmware nera draiveriu mezonui. Dek tu ta dlinko firmwara,
>>> ten yra asus'o firmwaras. Versijos irgi napasagysiu bet versija kazkas
>>> wl500gpv2
>>>
>>> "Matumba" <really@no.one> wrote in message
>>> news:hhvgk8$lfm$1@trimpas.omnitel.net...
>>>> klausyk, o negaletum padaryt paslauga ir ishlupt ish routerio
>>>> /usr/sbin/madwimax-scripts.tgz ir papostinti
>>>> /opt/etc/madwimax/event.sh?
>>>>
>>>> pabandychiau ant savo asuso, gal su skriptais kas netvarkoj, dariau
>>>> pagal http://mezon.projektas.lt tai dar ten visokie udhcpc.script
>>>> yra ir pan -- gal jie kreivi kokie nors...
>>>>
>>>> Tomas J. wrote:
>>>>> As lyg taip dariau
>>>>>
>>>>> mkdir /tmp/local/opt
>>>>> mount /tmp/local/opt /opt
>>>>> mkdir /opt/var
>>>>> mkdir /opt/var/run
>>>>> cp /usr/sbin/madwimax-scripts.tgz /tmp/madwimax-scripts.tgz
>>>>> cd /
>>>>> tar -xzf /tmp/madwimax-scripts.tgz
>>>>> rm /tmp/madwimax-scripts.tgz
>>>>> mkdir /usr/local/sbin
>>>>> echo "#!/bin/sh" > /usr/local/sbin/post-boot
>>>>> echo "mount /tmp/local/opt /opt" >> /usr/local/sbin/post-boot
>>>>> echo "insmod tun.o" >> /usr/local/sbin/post-boot
>>>>> echo "(while true; do
>>>>> /usr/sbin/madwimax --ssid=@mezon.lt -qof --event-script=/opt/etc/madwimax/event.sh;
>>>>> sleep 10; done )&" >> /usr/local/sbin/post-boot
>>>>> chmod +x /usr/local/sbin/*
>>>>> echo "/usr/local/sbin/post-boot" > /usr/local/.files
>>>>> flashfs save
>>>>> flashfs commit
>>>>> flashfs enable
>>>>> reboot
>>>>>
>>>>> Tiesa tai dejau i Dlink DIR-320 firmwara jei gerai pamenu naudojau
>>>>> sita dlink-320-madwimax-yota is http://seculab.ru/dlink-320/
>>>>>
>>>>>
>>>>> "Matumba" <really@no.one> wrote in message
>>>>> news:hhpr5l$qkn$1@trimpas.omnitel.net...
>>>>>> Labas,
>>>>>>
>>>>>> ishbandzhiau kruva firmware'u ir instrukciju
>>>>>> http://mezon.projektas.lt/
>>>>>> WL500gpv2-1.9.2.7-10.trx
>>>>>> WL500gpv2-1.9.2.7-d-r627M.trx
>>>>>> WL500gpv2-1.9.2.7-d-r893.trx
>>>>>>
>>>>>> rezultatas visada vienas -- mezonas neveikia, sysloge keistas erroras
>>>>>> kad USB disconnected, ir priesh tai jis kazhkodel CD-ROM tipo,
>>>>>> nepagaunu kampo.
>>>>>>
>>>>>> Gal kas turetu minchiu?
>>>>>>
>>>>>>
>>>>>> Jan 1 02:00:05 kernel: SCSI subsystem driver Revision: 1.00
>>>>>> Jan 1 02:00:05 kernel: hub.c: new USB device 00:03.1-1.2, assigned
>>>>>> address 3
>>>>>> Jan 1 02:00:05 kernel: usb.c: USB device 3 (vend/prod 0x4e8/0x6780)
>>>>>> is not claimed by any active driver.
>>>>>> Jan 1 02:00:05 kernel: Initializing USB Mass Storage driver...
>>>>>> Jan 1 02:00:05 kernel: usb.c: registered new driver usb-storage
>>>>>> Jan 1 02:00:06 kernel: scsi0 : SCSI emulation for USB Mass Storage
>>>>>> devices
>>>>>> Jan 1 02:00:06 kernel: Vendor: Samsung Model: Install Disk Rev:
>>>>>> 0.10
>>>>>> Jan 1 02:00:06 kernel: Type: CD-ROM ANSI SCSI revision: 02
>>>>>> Jan 1 02:00:06 kernel: USB Mass Storage support registered.
>>>>>> Jan 1 02:00:06 kernel: vlan1: Setting MAC address to 90 e6 ba 43 6d
>>>>>> b8.
>>>>>> Jan 1 02:00:06 kernel: VLAN (vlan1): Underlying device (eth0) has
>>>>>> same MAC, not checking promiscious mode.
>>>>>> Jan 1 02:00:07 dnsmasq[67]: read /etc/hosts - 2 addresses
>>>>>> Jan 1 02:00:07 dhcp client: deconfig: lease is lost
>>>>>> Jan 1 02:00:07 kernel: Universal TUN/TAP device driver 1.5
>>>>>> (C)1999-2002 Maxim Krasnyansky
>>>>>> Jan 1 02:00:07 kernel: USB device disconnected from the SCSI
>>>>>> subsystem
>>>>>
>>>
>
>