Sorry nepatikrinau:

http://www.mediafire.com/?ekfhmigucvx



Darenas

"Darenas" <klausk@jeireikia.com> wrote in message news:hfaj6j$7mt$1@trimpas.omnitel.net...
> Kelias- forumai, skaitai, skaitai ir dar karta skaitai:
> http://forum.gsmhosting.com/vbb/archive/index.php/t-354886.html
> 
> 
> eini cia ir nusitrauki firmware:ttp//firmware.javer.sgh.ru/?frm=E900XEFG2&t=2 
> tau reikia e900XExxx
> http://firmware.javer.sgh.ru/?frm=E900XEFG2&t=2
> 
> Instrukcija:
> 
> 
> You will need:
> 
> - Optiflash for E900 (found here - http://rapidshare.de/files/23872628/Downloader.zip.html  )
> - A firmware upgrade (jau turi linka auksciau)
> - The original samsung USB cable that came with the phone
> 
> Procedure:
> 
> Launch Optiflash and click on 'Options > Settings > Generic'
> - Select 'Customer T: D830/D840/E900 (USB)'
> - Set 'Flash Erase Passes' to '1'
> - Set 'Operation Passes' to 'Default'
> - Uncheck all checkboxes except 'Differences only'
> 
> Select the tab 'Flash and Verify'
> - Browse to and select your firmware (*.s3)
> 
> Select the tab 'Default Contents'
> If you have a file *.cts with the firmware *.s3:
> - Select radio button “S-Record with content”
> - Browse to and select your *.cts file
> 
> If you do not have the file *.cts:
> - Click on 'S-Record only'
> 
> - Click 'OK'
> 
> - Remove your SIM and microSD card from the phone and turn it off.
> 
> - Connect the phone to the computer via the USB cable.
> 
> - Whilst holding down the * key on the phone, briefly press the ON/OFF button.
> 
> Your computer will recognise the device as Samsung USB Mobile.
> 
> Return to Optiflash, Click on 'Options > Settings > COM Port'
> - Select the COM port your phone uses (If you're not sure, you can find out by: Control Panel > System > Hardware > Device Manager > Ports (COM and LTP))
> - Select 921600.
> - In Second COM Port select 'NONE'
> 
> - Click 'OK'
> 
> Lastly, click 'Flash'
> 
> 
> The flash procedure will be finished when the message 'All is Well' appears above the green progression bar.
> 
> A full reset should not be necessary once the firmware is upgraded, however, if you want to do it: Type *2767*3855# then wait one full minute before you restart your phone.
> 
> To check your existing firmware type *#1234# into your handset
> 
> Time to flash: approx 15 mins.
> 
> 
> ** NOTE: IF YOUR PHONE RESTARTS IN A DIFFERENT LANGUAGE, DON'T PANIC! THE LANGUAGE SELECTION PROCESS IS:
> 
> MENU (left touch button) > SETTINGS (bottom right icon) > PHONE SETTINGS (2nd option) > LANGUAGE (1st option)