On 2010-03-04 14:01, ROOTS wrote: > ai emergency radau ir 2.2 > tai naudot emergency ir jo isntalinimo buda? > Taip. > Emergency Firmware Installation. > > In case your player would crash and stops responding to your remote’s commands and you need to remove the powercord to restart, it could have problems with restarting or will not start at all. You could also face other issues that can only be solved by installing the emergency firmware. Follow this procedure please: > Download last available emergency firmware, applicable to your players present firmware-revision ( i.e. v 2.x.x ). Unpack this zip-file to a FAT32-formatted usb-stick. ( MAC OS-users : be aware you do not extract the .xtr-file ! ) Connect the usb-stick to the right usb-port of your Xt-player ( front view ). > If your player will not boot anymore, proceed like this: > Connect the usb-stick to the right usb-port ( front view ) and remove the WiFi-antenna. Connect the player to your tv-set using the “component-cable”. Take your remote and look for the buttons “Home”, “3” and “Power”. > Now connect your powersupply to the player and press following buttons 1 by 1, at 1 second interval : “Home”, “3” and “Power”. Do not press 2 or more buttons at once and do not keep them pressed. You may need to repeat this more than 1x to start the actual update. > After updating has finished, your player will restart. After restart you need to go to the “settings” in the main-menu, click “enter” and go to “System” on the next page. On the “System”-page you go to “Restore Defaults” and click OK. Choose your language and click OK. Next is to shut down your player. Wait 1 minute, you can remove the usb-stick and reconnect the WiFi-antenne is necessary and restart your player. > Re-enter your preferences. > In case you want to install the emergency firmware to solve other issues that might be related to corrupted firmware, follow the normal firmware update-procedure from point 1 in the description on the 1st page. > > Your issues should be solved and your player should be functional again. > Remember to “Restore Defaults” after every firmware-update, no matter what ! > > *Just remember to disconnect your NFS-shares before restoring defaults*