Na dabar viskas veikia kaip ir noretusi.
Ikisus i bet kuri USB porta visi USB flesiukai (tiek FAT tiek ir NTFS) 
ir fotikas mountinasi automatiskai ir atvercia Nautilus brouzeri. Sita 
automatini atvertima irgi ishsiaiskinau per gconf-editor parametrus.

Mano SysLogas (ishsiaishkinau kur toks yra:) anksciau ikisus USB 
sakydavo stai ka..
-------------------------
Mar 22 19:18:46 darius-desktop kernel: [ 4135.909637] usb 1-2.4: new 
high speed USB device using ehci_hcd and address 6
Mar 22 19:18:46 darius-desktop kernel: [ 4136.018536] usb 1-2.4: 
configuration #1 chosen from 1 choice
Mar 22 19:19:00 darius-desktop kernel: [ 4149.842862] usb 1-2.4: USB 
disconnect, address 6
Mar 22 19:19:10 darius-desktop kernel: [ 4160.584042] usb 1-6: new high 
speed USB device using ehci_hcd and address 7
Mar 22 19:19:10 darius-desktop kernel: [ 4160.717557] usb 1-6: 
configuration #1 chosen from 1 choice
Mar 22 19:31:43 darius-desktop kernel: [ 4913.568829] usb 1-6: USB 
disconnect, address 7
-------------------------
Po to kai instaliavau per Synaptic Manager'i 'pmount'. Viskas pradejo 
veikti be jokiu bedu. Kiek suprantau tas 'pmount' yra reikalinag for 
'unprivileged users'.
Siaip pas mane standartine Ubuntu instaliacija, sedziu po savo 
default'iniu userio account'u kuris nuo instaliacijos pradzios toks buvo.

Dekui visiems, kas padejo ir uzvede ant kelio.. :)




lingus wrote:
> įkišus komanda "lsmod" pažiūrėk ar išvis kernelis pagauna tavo usb flash:
> 
> # dmesg
> <...>
> [ 6111.492857] usb 1-1: new high speed USB device using ehci_hcd and 
> address 5
> [ 6111.626593] usb 1-1: configuration #1 chosen from 1 choice
> [ 6111.688899] Initializing USB Mass Storage driver...
> [ 6111.689009] scsi2 : SCSI emulation for USB Mass Storage devices
> [ 6111.689089] usbcore: registered new interface driver usb-storage
> [ 6111.689091] USB Mass Storage support registered.
> [ 6111.697652] usb-storage: device found at 5
> [ 6111.697655] usb-storage: waiting for device to settle before scanning
> [ 6116.712840] usb-storage: device scan complete
> [ 6116.736535] scsi 2:0:0:0: Direct-Access     SanDisk  U3 Contour  4.04 
> PQ: 0 ANSI: 2
> [ 6116.832693] sd 2:0:0:0: Attached scsi generic sg2 type 0
> [ 6116.847258] sd 2:0:0:0: [sdb] 8027793 512-byte logical blocks: (4.11 
> GB/3.82 GiB)
> [ 6116.847756] sd 2:0:0:0: [sdb] Write Protect is off
> [ 6116.847759] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
> [ 6116.847761] sd 2:0:0:0: [sdb] Assuming drive cache: write through
> [ 6116.870012] sd 2:0:0:0: [sdb] Assuming drive cache: write through
> [ 6116.870018]  sdb: sdb1
> [ 6116.882928] sd 2:0:0:0: [sdb] Assuming drive cache: write through
> [ 6116.882932] sd 2:0:0:0: [sdb] Attached SCSI removable disk
> 
> mano atveju randamas "sdb". Tuomet "fdisk -l /dev/sdb" pamatysi kokios 
> jame yra particijos
> 
> # fdisk -l /dev/sdb
> Disk /dev/sdb: 4110 MB, 4110230016 bytes
> 255 heads, 63 sectors/track, 499 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> Disk identifier: 0x0001d898
>    Device Boot      Start         End      Blocks   Id  System
> /dev/sdb1   *           1         499     4008186    7  HPFS/NTFS
> 
> čia matosi, kad flash'e yra viena particija "/dev/sdb1". Ją mountini 
> "mount -t ntfs-3g /dev/sdb1 /mnt/ -o force"