ups suklydau route 192.168.0.0 255.255.255.0 ir 192..168.2.6 nreikia bet reikia push "route 192.168.0.0 255.255.255.0" "belenkas" <belenkas@tt.lt> wrote in message news:gl7gsj$iht$1@trimpas.omnitel.net... > > "Pluss" <pluss.work@gmail.com> wrote in message > news:gl6j3v$qcq$1@trimpas.omnitel.net... >> Sveiki. >> Reikia pagalbos su OpenVPN. >> Imones LAN'as 192.168.0.0 (visi iseina per Gateway 192.168.0.254 (Linux, >> Debian)). Tarkim as jungiuosi is namu (Point to Point) prie imones. >> Susijungti susijungia be problemu, tik as is namu negaliu pasiekti nei >> vieno IP (pinginau), o is Gateway namu PC pasiekiu (192.168.2.6). >> Reiketu kad klientai galetu pasiekti visus imones PC esancius >> 192.168.0.0. >> >> Kai ant gw startuoja OpenVPN, susikuria interface tun0: >> inet addr:192.168.2.1 P-t-P:192.168.2.2 Mask:255.255.255.255 >> >> O namie: >> inet addr:192.168.2.6 P-t-P:192.168.2.5 Mask:255.255.255.255 >> >> Pridedu zemiau Serverio ir kliento konfigus. >> Jei kas susipazines su OpenVPN, gal kas pagelbetumete? >> >> >> Dekui isanksto. >> >> #############################Server conf############################# >> # >> # Which local IP address should OpenVPN >> # listen on? (optional) >> local AAA.BBB.CCC.DDD # VPN serverio isorinis IP >> >> # Which TCP/UDP port should OpenVPN listen on? >> # If you want to run multiple OpenVPN instances >> # on the same machine, use a different port >> # number for each one. You will need to >> # open up this port on your firewall. >> port 1194 >> >> # TCP or UDP server? >> ;proto tcp >> proto udp >> >> # "dev tun" will create a routed IP tunnel, >> # "dev tap" will create an ethernet tunnel. >> # Use "dev tap0" if you are ethernet bridging >> # and have precreated a tap0 virtual interface >> # and bridged it with your ethernet interface. >> # If you want to control access policies >> # over the VPN, you must create firewall >> # rules for the the TUN/TAP interface. >> # On non-Windows systems, you can give >> # an explicit unit number, such as tun0. >> # On Windows, use "dev-node" for this. >> # On most systems, the VPN will not function >> # unless you partially or fully disable >> # the firewall for the TUN/TAP interface. >> ;dev tap >> dev tun >> >> # Windows needs the TAP-Win32 adapter name >> # from the Network Connections panel if you >> # have more than one. On XP SP2 or higher, >> # you may need to selectively disable the >> # Windows firewall for the TAP adapter. >> # Non-Windows systems usually don't need this. >> ;dev-node MyTap >> >> # SSL/TLS root certificate (ca), certificate >> # (cert), and private key (key). Each client >> # and the server must have their own cert and >> # key file. The server and all clients will >> # use the same ca file. >> # >> # See the "easy-rsa" directory for a series >> # of scripts for generating RSA certificates >> # and private keys. Remember to use >> # a unique Common Name for the server >> # and each of the client certificates. >> # >> # Any X509 key management system can be used. >> # OpenVPN can also use a PKCS #12 formatted key file >> # (see "pkcs12" directive in man page). >> ca /etc/openvpn/easy-rsa/keys/ca.crt >> cert /etc/openvpn/easy-rsa/keys/server.crt >> key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept >> secret >> >> # Diffie hellman parameters. >> # Generate your own with: >> # openssl dhparam -out dh1024.pem 1024 >> # Substitute 2048 for 1024 if you are using >> # 2048 bit keys. >> dh /etc/openvpn/easy-rsa/keys/dh1024.pem >> >> # Configure server mode and supply a VPN subnet >> # for OpenVPN to draw client addresses from. >> # The server will take 10.8.0.1 for itself, >> # the rest will be made available to clients. >> # Each client will be able to reach the server >> # on 10.8.0.1. Comment this line out if you are >> # ethernet bridging. See the man page for more info. >> server 192.168.2.0 255.255.255.0 >> >> # Maintain a record of client <-> virtual IP address >> # associations in this file. If OpenVPN goes down or >> # is restarted, reconnecting clients can be assigned >> # the same virtual IP address from the pool that was >> # previously assigned. >> ifconfig-pool-persist ipp.txt >> >> # Configure server mode for ethernet bridging. >> # You must first use your OS's bridging capability >> # to bridge the TAP interface with the ethernet >> # NIC interface. Then you must manually set the >> # IP/netmask on the bridge interface, here we >> # assume 10.8.0.4/255.255.255.0. Finally we >> # must set aside an IP range in this subnet >> # (start=10.8.0.50 end=10.8.0.100) to allocate >> # to connecting clients. Leave this line commented >> # out unless you are ethernet bridging. >> ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 >> >> # Push routes to the client to allow it >> # to reach other private subnets behind >> # the server. Remember that these >> # private subnets will also need >> # to know to route the OpenVPN client >> # address pool (10.8.0.0/255.255.255.0) >> # back to the OpenVPN server. >> ;push "route 192.168.10.0 255.255.255.0" >> ;push "route 192.168.20.0 255.255.255.0" >> >> # To assign specific IP addresses to specific >> # clients or if a connecting client has a private >> # subnet behind it that should also have VPN access, >> # use the subdirectory "ccd" for client-specific >> # configuration files (see man page for more info). >> >> # EXAMPLE: Suppose the client >> # having the certificate common name "Thelonious" >> # also has a small subnet behind his connecting >> # machine, such as 192.168.40.128/255.255.255.248. >> # First, uncomment out these lines: >> client-config-dir ccd >> route 192.168.2.6 255.255.255.0 > turetu buti route 192.168.0.0 255.255.255.0 > >> # Then create a file ccd/Thelonious with this line: >> # iroute 192.168.40.128 255.255.255.248 >> # This will allow Thelonious' private subnet to >> # access the VPN. This example will only work >> # if you are routing, not bridging, i.e. you are >> # using "dev tun" and "server" directives. >> >> # EXAMPLE: Suppose you want to give >> # Thelonious a fixed VPN IP address of 10.9.0.1. >> # First uncomment out these lines: >> client-config-dir ccd >> route 192.168.2.0 255.255.255.0 > sito jau nebereikia > >> # Then add this line to ccd/Thelonious: >> # ifconfig-push 10.9.0.1 10.9.0.2 >> >> # Suppose that you want to enable different >> # firewall access policies for different groups >> # of clients. There are two methods: >> # (1) Run multiple OpenVPN daemons, one for each >> # group, and firewall the TUN/TAP interface >> # for each group/daemon appropriately. >> # (2) (Advanced) Create a script to dynamically >> # modify the firewall in response to access >> # from different clients. See man >> # page for more info on learn-address script. >> ;learn-address ./script >> >> # If enabled, this directive will configure >> # all clients to redirect their default >> # network gateway through the VPN, causing >> # all IP traffic such as web browsing and >> # and DNS lookups to go through the VPN >> # (The OpenVPN server machine may need to NAT >> # the TUN/TAP interface to the internet in >> # order for this to work properly). >> # CAVEAT: May break client's network config if >> # client's local DHCP server packets get routed >> # through the tunnel. Solution: make sure >> # client's local DHCP server is reachable via >> # a more specific route than the default route >> # of 0.0.0.0/0.0.0.0. >> ;push "redirect-gateway" >> >> # Certain Windows-specific network settings >> # can be pushed to clients, such as DNS >> # or WINS server addresses. CAVEAT: >> # http://openvpn.net/faq.html#dhcpcaveats >> push "dhcp-option DNS 192.168.0.241" >> push "dhcp-option WINS 192.168.0.241" >> >> # Uncomment this directive to allow different >> # clients to be able to "see" each other. >> # By default, clients will only see the server. >> # To force clients to only see the server, you >> # will also need to appropriately firewall the >> # server's TUN/TAP interface. >> ;client-to-client >> >> # Uncomment this directive if multiple clients >> # might connect with the same certificate/key >> # files or common names. This is recommended >> # only for testing purposes. For production use, >> # each client should have its own certificate/key >> # pair. >> # >> # IF YOU HAVE NOT GENERATED INDIVIDUAL >> # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, >> # EACH HAVING ITS OWN UNIQUE "COMMON NAME", >> # UNCOMMENT THIS LINE OUT. >> ;duplicate-cn >> >> # The keepalive directive causes ping-like >> # messages to be sent back and forth over >> # the link so that each side knows when >> # the other side has gone down. >> # Ping every 10 seconds, assume that remote >> # peer is down if no ping received during >> # a 120 second time period. >> keepalive 10 120 >> >> # For extra security beyond that provided >> # by SSL/TLS, create an "HMAC firewall" >> # to help block DoS attacks and UDP port flooding. >> # >> # Generate with: >> # openvpn --genkey --secret ta.key >> # >> # The server and each client must have >> # a copy of this key. >> # The second parameter should be '0' >> # on the server and '1' on the clients. >> tls-auth /etc/openvpn/easy-rsa/keys/tlsauth.key 0 # This file is secret >> tls-server >> >> # Select a cryptographic cipher. >> # This config item must be copied to >> # the client config file as well. >> cipher BF-CBC # Blowfish (default) >> ;cipher AES-128-CBC # AES >> ;cipher DES-EDE3-CBC # Triple-DES >> >> # Enable compression on the VPN link. >> # If you enable it here, you must also >> # enable it in the client config file. >> comp-lzo >> >> # The maximum number of concurrently connected >> # clients we want to allow. >> max-clients 100 >> >> # It's a good idea to reduce the OpenVPN >> # daemon's privileges after initialization. >> # >> # You can uncomment this out on >> # non-Windows systems. >> user nobody >> group nogroup >> >> # The persist options will try to avoid >> # accessing certain resources on restart >> # that may no longer be accessible because >> # of the privilege downgrade. >> persist-key >> persist-tun >> >> # Output a short status file showing >> # current connections, truncated >> # and rewritten every minute. >> status openvpn-status.log >> >> # By default, log messages will go to the syslog (or >> # on Windows, if running as a service, they will go to >> # the "\Program Files\OpenVPN\log" directory). >> # Use log or log-append to override this default. >> # "log" will truncate the log file on OpenVPN startup, >> # while "log-append" will append to it. Use one >> # or the other (but not both). >> log openvpn.log >> ;log-append openvpn.log >> >> # Set the appropriate level of log >> # file verbosity. >> # >> # 0 is silent, except for fatal errors >> # 4 is reasonable for general usage >> # 5 and 6 can help to debug connection problems >> # 9 is extremely verbose >> verb 4 >> >> # Silence repeating messages. At most 20 >> # sequential messages of the same message >> # category will be output to the log. >> ;mute 20 >> # >> ###################################################### >> >> >> >> >> #############################Client conf############################# >> # >> # Specify that we are a client and that we >> # will be pulling certain config file directives >> # from the server. >> client >> >> # Use the same setting as you are using on >> # the server. >> # On most systems, the VPN will not function >> # unless you partially or fully disable >> # the firewall for the TUN/TAP interface. >> ;dev tap >> dev tun >> >> # Windows needs the TAP-Win32 adapter name >> # from the Network Connections panel >> # if you have more than one. On XP SP2, >> # you may need to disable the firewall >> # for the TAP adapter. >> ;dev-node MyTap >> >> # Are we connecting to a TCP or >> # UDP server? Use the same setting as >> # on the server. >> ;proto tcp >> proto udp >> >> # The hostname/IP and port of the server. >> # You can have multiple remote entries >> # to load balance between the servers. >> remote AAA.BBB.CCC.DDD 1194 # VPN serverio isorinis IP >> ;remote my-server-2 1194 >> >> # Choose a random host from the remote >> # list for load-balancing. Otherwise >> # try hosts in the order specified. >> ;remote-random >> >> # Keep trying indefinitely to resolve the >> # host name of the OpenVPN server. Very useful >> # on machines which are not permanently connected >> # to the internet such as laptops. >> resolv-retry infinite >> >> # Most clients don't need to bind to >> # a specific local port number. >> nobind >> >> # Downgrade privileges after initialization (non-Windows only) >> user nobody >> group nogroup >> >> # Try to preserve some state across restarts. >> persist-key >> persist-tun >> >> # If you are connecting through an >> # HTTP proxy to reach the actual OpenVPN >> # server, put the proxy server/IP and >> # port number here. See the man page >> # if your proxy server requires >> # authentication. >> ;http-proxy-retry # retry on connection failures >> ;http-proxy [proxy server] [proxy port #] >> >> # Wireless networks often produce a lot >> # of duplicate packets. Set this flag >> # to silence duplicate packet warnings. >> ;mute-replay-warnings >> >> # SSL/TLS parms. >> # See the server config file for more >> # description. It's best to use >> # a separate .crt/.key file pair >> # for each client. A single ca >> # file can be used for all clients. >> ca /etc/openvpn/easy-rsa/keys/ca.crt >> cert /etc/openvpn/easy-rsa/keys/nerijusv.crt >> key /etc/openvpn/easy-rsa/keys/nerijusv.key >> >> # Verify server certificate by checking >> # that the certicate has the nsCertType >> # field set to "server". This is an >> # important precaution to protect against >> # a potential attack discussed here: >> # http://openvpn.net/howto.html#mitm >> # >> # To use this feature, you will need to generate >> # your server certificates with the nsCertType >> # field set to "server". The build-key-server >> # script in the easy-rsa folder will do this. >> ##ns-cert-type server >> >> # If a tls-auth key is used on the server >> # then every client must also have the key. >> tls-auth /etc/openvpn/easy-rsa/keys/tlsauth.key 1 >> tls-client >> >> # Select a cryptographic cipher. >> # If the cipher option is used on the server >> # then you must also specify it here. >> ;cipher x >> cipher BF-CBC >> >> # Enable compression on the VPN link. >> # Don't enable this unless it is also >> # enabled in the server config file. >> comp-lzo >> >> # Set log file verbosity. >> verb 4 >> >> # Silence repeating messages >> ;mute 20 >> >> # By Pluss / Ijungti Logai >> status openvpn-status.log >> log openvpn.log >> # >> route-delay 2 >> #route 192.168.0.0 255.255.255.0 192.168.2.6 >> #route add -net 192.168.0.0 netmask 255.255.255.0 gw 192.168.2.6 >> # >> ############################################################ > >