thanks more or less aisku :)

On 2010.02.24 12:54, AloneWolf wrote:
> Intermediate (assuming you’re using Photoshop) – Fuji recommends your
> image to be in a sRGB color space. Be sure to tell the operator that you
> do not want any additional adjustment, for although the machine will not
> automatically compensate, the operator still might try to be helpful by
> making changes.
> 1 - Open your file in Photoshop (or your choice of image editing
> programs) and Save As an uncompressed file as either a PSD or TIF which
> will become your working original.
> 2 - Do your editing, correct color, open shadows, crop etc., then Save
> As "working original 2".
> 3 - Resize your finished image. Go to Image>Image Size. Make sure
> Constraint Proportions and Resample Image (Bicubic) is checked. Enter
> 300 for the resolution and 10 for the width (or height if it’s a
> vertical). Depending on the aspect ration of the original scan, the size
> in the height box will vary. Pay attention to the Pixel Dimensions above
> the size in inches. It should now read 2250x3000 pixels. That's the same
> as 7.5 x 10 inches at 300 pixels per inch.
> 4 - Add Unsharp Mask if the image needs to be sharpened. This is a
> judgment call based on your personal vision and the particular image.
> 5 - Add a canvas so the image will print properly as an 8x10. Go to
> Image>Canvas Size. If you're working in inches, change the 7.5 to 8
> inches. If you're working in pixels, change the 2250 to 2400 pixels. In
> both cases, the exact same size border will be added to the 7.5 inch
> sides to make it centered on an 8 inch canvas. We have gotten into the
> habit of adding copyright, contact and image file numbers in that border
> area, but you could choose to leave it white, or black, if you want.
> 6 - Save As a TIF adding 8x10 to the file name. This will be the file
> you burn to a CD or copy to a zip disk to be printed. An 8x10 becomes a
> 20+ megabyte Tif file.
>
> 2010.02.24 10:50, nexus rašė:
>> Sveiki,
>>
>>
>> Kaip rekomenduotumet paruosti turima raw faila pries atiduodant i
>> fotolaba nuotrauku 10x15 spausdinimui.
>> Kazkiek naudoju LR. Exportuociau turima faila i reikiama, bet nezinau
>> kokius nustatymus uzdeti, ta prasme dpi, failo formatas tiff, jpg,
>> kompresijos dydis procentais, sRGB.
>> Dar kazkur buvau skaites, kad sharpinima geriau atlikti po exportavimo.
>>
>> Dekui is anksto