Taigi viskas parasyta :-)

Kompas skaicuoja, kiek temperaturminuciu truksta silumnesyje (kai siurblys 
jau nebepatraukia per salcius).

Kai trukstamu temperaturminuciu kiekis virsyja 360, isijugia elektrinis 
sildymas, kuris pasildo silumnesi virs uzduotos temperaturos tiek, kad 
kompensuotu trukstama temperaturminuciu (geras terminas :-) ) skaiciu.

Cia taip nesileidziant i detales, kuriu tau nereikia.

"kancleris" <kancleris@nospamgmail.com> wrote in message 
news:ms8pi6$1o9$1@trimpas.omnitel.net...
> bandau pries sisldymo sezona susidraugauti su silumos siurbliu ir
> susiduriau su funkcija, kurios nevisai suprantu, tiksliau
> nesuprantu veikimo principo ir kaip nustatyti.
> Istrauka is manualo:
> If, for example, the heat medium flow temperature has
> been 3 degrees lower than the calculated heat medium
> flow temperature for 60 minutes; 3 x 60 = 180
> degree-minutes is registered by the computer. Using
> the standard setting the number of degree-minutes
> should amount to 360 (60 + 300) before the immersion
> heater?s first step is connected. After which the following
> steps are connected with a further 100 degree
> minutes difference. The output step remains actuated
> until the degree-minute demand for each step has
> been compensated, which means that the heat medium
> flow temperature must be as many degree-minutes
> above the calculated flow level as it was previously
> under. This is how the average heat medium flow temperature
> calculated by the computer is obtained.
>
>
> ???
>
>
> -- 
>
>
> ----Android NewsGroup Reader----
> http://usenet.sinaapp.com/